Sunday 22 July 2012

E21 316: Re-Spray Strip-Down 3 - Wipers + Washer Nozzle Removal.

A. Washer-Jet Nozzles:

1. Twist and pull the hose off from below the washer-nozzles.

2. The nozzles have a plastic at the base that spreads when they're pushed into the body, so working them out is pretty easy by pressing the flaps in with your finger one at a time.

B. Windscreen Wiper-Arms + Bases:

1. Lift the cap at each wiper-arm base and, using an adjustable-spanner, remove the top-nut and washer.

2. Raise the wiper-arm to an upright position and wiggle it off the spline.

3. Remove the large diameter nut and washer from the base-mount and remove the mount. *The rubber seal will likely be perished and hard to find a replacement, but you can just cut a new one out of sheet-rubber as I did, or I will supply a set for £1.99 inc. postage to mainland UK - see here.

No comments:

Post a Comment